2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The
ROCKWOOD PNEUMATIC MINI BELT SANDER
is compact and powerful with an adjustable angle
sanding arm for ease in grinding and sanding difficult to reach areas. It features a sealed ball bear-
ing drive assembly for smooth, low vibration operation and long life. The precision diecast housing
provides a solid foundation and offers ergonomic, one handed operation with a convenient handle
mounted paddle trigger.
CONTENTS
(1)
Mini Belt Sander
(1)
4 mm Hex-Key Wrench
(3)
3/8” x 13” Abrasive Belts
(one installed)
(1)
1/4” NPT Air Inlet Coupling
SPECIFICATIONS
RPM:
18,000 free speed
Air Consumption:
4 CFM [113 L/m] @90 PSI [6.2 bar]
Inlet thread size:
1/4” FNPT
Required Belt Size:
3/8” x 13”, minimum 18,000 RPM
REQUIRED FOR USE
• The inlet air supply should have a moisture separator capable of removing all moisture and
impurities from the air supply. Moisture in the air supply will cause poor tool performance
and damage.
• A suitable regulator must be used to limit incoming air pressure to 90 PSI maximum. Excessive
air pressure can cause permanent damage to the unit and possible serious personal injury from
bursting.
• For best results, a compressor capable of providing a minimum of 4 CFM @ 90 PSI is recom-
mended for best performance. Less available CFM will negatively affect the performance of the
Belt Sander and may overwork the compressor.