manualshive.com logo in svg

Rockwell Automation Allen-Bradley VersaView 6180W-12BPXPH, Руководство пользователя, Страница: 54 / 70

Поделиться
Скачать
Rockwell Automation Allen-Bradley VersaView 6180W-12BPXPH Скачать руководство пользователя страница 54

Publication 6180W-UM001H-EN-P - August 2007

System Troubleshooting        

53

Troubleshooting Checklists 

Use the following checklists to test or verify items.

Problems During Start-up

•

Is the video loopback cable installed and secure?

•

Are all connections secure? 

•

Are the device drivers installed? 

•

Are the jumpers on any add-in boards correctly positioned? 

•

Is the hard drive formatted and recognized correctly in the 
BIOS? 

•

Is the RAM memory properly installed? You may want to reinstall 
it to be sure of a good connection.

•

Is the IDE cable from the hard drive properly connected? You 
may want to see if the system will start from a floppy disk. 

•

Is BIOS properly configured? Select Load Optimal Default in the 
CMOS setup procedure. This will restore the BIOS settings to the 
original factory settings.

Problem After Start-up 

•

If you are running a software package, reinstall the software.

•

If the problem is intermittent, you may have a loose connection. 
Check all connections including any ISA/PCI cards. Check that 
the memory module is fully installed. 

•

Does your system have a computer virus? Run anti-virus 
software.

•

Select Load Optimal Default in the CMOS setup procedure. This 
will restore the BIOS settings to the original factory settings. 

•

Although the computers have a regulated and protected power 
supply, a transient voltage in the power line or peripheral cable 
may cause a flickering display, unexpected restarts, or a locked 
up system. If so, exit the application and start over. 

•

Is the IDE cable from the hard drive properly connected? You 
may want to see if the system will start from a floppy drive. 

•

Is the system overheating? Verify that the chassis fan is working 
and the fan filter is clean.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание Allen-Bradley VersaView 6180W-12BPXPH







































































Отзывы:

Нет отзывов