Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
37
Second Generation MobileView Tethered Operator Terminal
6.
On the General tab of the Properties dialog box, press one of the following buttons:
• ‘Obtain an IP address automatically’ if you have a DHCP server on your network
that assigns IP addresses to the second generation MobileView 2711T terminal.
• ‘Use the following IP address’ to assign a static IP address. Complete the three text
boxes with information from your network administrator or Internet service
provider.
Use the onscreen keyboard or an external keyboard to enter the text.
7.
Press OK.
8.
Press Close on the Local Connection Properties dialog.
9.
Close Network Connections window to return to the second generation MobileView
2711T terminal desktop.
FTView ME Station
FactoryTalk View Machine Edition (ME) Station software on your second generation
MobileView 2711T terminal is dependent on a runtime application file that is configured on a
separate personal computer with FactoryTalk View Studio software installed.
To initially configure FactoryTalk View ME Station, perform the following steps.
1.
Create a runtime application file (MER) with FactoryTalk View Studio software.
2.
Within FactoryTalk View Studio software, launch the transfer utility.
IMPORTANT
EWF must be disabled before you configure FactoryTalk View ME settings, and then enabled
afterwards. For more information, see
Enhanced Write Filter (EWF) on page 34
Must be a unique address on the LAN.
Must be identical to the server subnet mask.
Optional
