Rockwell Automation Allen-Bradley MobileView 2711T-B10I1N1, Быстрый старт

Страница: 29 / 48

Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019 29
Second Generation MobileView Tethered Operator Terminal
Initial Power Up of the Second Generation MobileView 2711T Terminal
This section applies to when you apply power to the second generation MobileView 2711T
terminal for the first time. It provides details on the following topics:
• Verify the Connection
• Test Safety Functions
• Initial Configuration of the Windows Operating System
• Icons on the Terminal Desktop Taskbar
Verify the Connection
To verify that the second generation MobileView 2711T terminal is properly connected,
perform the following steps.
1. Attach the 22-pin MobileView connection cable to the IP65 junction box as shown on
page 28 .
2. Check the second generation MobileView 2711T terminal for a start-up screen.
If the start-up screen does not appear, check the 24V DC power source and cable
connections at the IP65 junction box and second generation MobileView 2711T
terminal.
ATTENTION: The second generation MobileView 2711T terminal automatically starts when the
22-pin connection cable is connected to an IP65 junction box with 24V DC power applied.
Status Indicator Light
Start-up Screen