Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
13
Second Generation MobileView Tethered Operator Terminal
2711T-JBBKCOVER Back Cover Plate Accessory
This accessory is for rear access to the junction box from inside a control cabinet. This cover plate
provides quick access to configurable components for both junction boxes (see
), and to reduce cables that might otherwise be directed through cord grips on the
2711T-JBIP65DC1 junction box.
The cover plate is fitted with a seal. To maintain a tight seal and the IP65 rating (when installed
on an IP65-rated control cabinet), install the cover plate on an even surface.
Figure 3 - 2711T-JBBKCOVER Back Cover Plate Dimensions
IMPORTANT
Any cable fed through the control cabinet wall must be smaller than the hole in the cabinet
wall.
Provide stress relief for the cables on the control cabinet side when you wire an IP65 junction
box with this back cover plate.
221.1 (8.7)
140 (5.51)
132.5
(5.22)
172 (6.77)
40
(1.57)
162.1
(6.38)
Mounting
Holes,
4 x 4.5 (0.18)
All dimensions are in mm (in.)
