62
LDAT-Series Integrated Linear Thrusters
Rockwell Automation Publication LDAT-IN001B-EN-P - March 2020
10.
Slide the slider and coil assembly from the stator body until the internal encoder
connector is exposed.
Complete this step without affecting the position of the coil on the slider.
11.
Disconnect the internal encoder connector.
12.
Remove the slider assembly and coil completely from the stator body.
Assemble the Linear Thruster
Follow this procedure to assemble your linear thruster. Use the figures from the disassemble
procedure as a reference.
1.
Slide the slider and coil assembly into the stator body.
2.
Connect the encoder connectors when they are close enough.
3.
Carefully stuff the feedback then power cables into the stator body.
Be sure the cables are not touching the slide assembly.
4.
Loosely attach the coil to the stator body.
ATTENTION:
The coil is held to the magnet track on the slider by the magnetic forces.
Do not allow it to move or attempt to move it while attempting repairs. Moving the coil
will make reassembly difficult.
ATTENTION:
The coil is held to the magnet track on the slider by the magnetic forces. Do
not allow it to move or attempt to move it while attempting repairs. Moving the coil will
make reassembly difficult.
ATTENTION:
Be sure the cables do not come in contact with the slider assembly when
completing the assembly. Contact with moving parts will cause damage to the cables
and premature failure of the linear thruster.
