Rockwell Automation Allen-Bradley G Series, Руководство пользователя

Страница: 43 / 56

Rockwell Automation Publication 1502-UM060A-EN-P - October 2020 43
Chapter 4 Maintenance
1. Cut wire ties at the rear of the contactor holding the mechanical latch coil
wires in place ( Figure 30 ).
Figure 30 - Rear View of Mechanical Latch Contactor (showing wires to trip coil)
2. Using ½ in. wrench, remove the auxiliary contact actuator plate from the
main shaft assembly ( Figure 31 ).
Figure 31 - Auxiliary Actuator Plate Removal
3. Using two 7/16 in. wrenches, loosen the auxiliary contact assembly
retaining bolt and slide the auxiliary contact assembly out of the front of
the contactor (
Figure 32 ).
Trip Coil Wires
Actuator Plate