Rockwell Automation Allen-Bradley CENTERLINE 2100 Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 108

background image

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Publication 2100-IN012D-EN-P - September 2010

108

PN-

93799

Supersedes Publication 2100-IN012C-EN-P - April 2009

Copyright © 2010 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

Rockwell Automation Support

Rockwell Automation provides technical information on the Web to assist you in using its products.
At

http://www.rockwellautomation.com/support/

, you can find technical manuals, a knowledge base of FAQs, technical and

application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the
best use of these tools.

For an additional level of technical phone support for installation, configuration, and troubleshooting, we offer TechConnect
support programs. For more information, contact your local distributor or Rockwell Automation representative,
or visit

http://www.rockwellautomation.com/support/

Installation Assistance

If you experience a problem within the first 24 hours of installation, review the information that is contained in this manual.
You can contact Customer Support for initial help in getting your product up and running.

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility.
However, if your product is not functioning and needs to be returned, follow these procedures.

Documentation Feedback

Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document,
complete this form, publication

, available at

http://www.rockwellautomation.com/literature/

.

United States or Canada

1.440.646.3434

Outside United States or
Canada

Use the

Worldwide Locator

http://www.rockwellautomation.com/support/americas/phone_en.html

, or contact

your local Rockwell Automation representative.

United States

Contact your distributor. You must provide a Customer Support case number (call the phone number above to obtain
one) to your distributor to complete the return process.

Outside United States

Please contact your local Rockwell Automation representative for the return procedure.

«
...
106
107
108

Содержание Allen-Bradley CENTERLINE 2100













































































































Отзывы:

Нет отзывов

Похожие инструкции для Allen-Bradley CENTERLINE 2100

Бренд: Eaton Страницы: 16

Бренд: Bartlett Страницы: 5

Бренд: Campbell Страницы: 3

Бренд: Datavideo Страницы: 17

Бренд: Datamax Страницы: 22

Бренд: LAIA Страницы: 71

Бренд: Eaton Страницы: 4

Бренд: Eaton Страницы: 10

Бренд: Eaton Страницы: 288

ROBO Cylinder RCP2 Series

Бренд: IAI Страницы: 5

Бренд: ICP DAS USA Страницы: 4

Бренд: ICP DAS USA Страницы: 6

EIP-2000 Series

Бренд: ICP DAS USA Страницы: 19

Бренд: ICP DAS USA Страницы: 4

Бренд: L. G. B. Страницы: 2

Бренд: L-Acoustics Страницы: 36

Бренд: D+H Страницы: 32

8745 MFC Ethernet

Бренд: Burkert Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды