Rockwell Automation Allen Bradley Bulletin 6185-C 15, Инструкция по установке и эксплуатации

Страница: 7 / 42

Industrial 15" Flat Panel Monitor 7
Publication 6185-5.1
Panel Mounting Guidelines
Observe the following precautions before installing the unit in a panel:
•
Confirm that there is adequate space behind the panel. Remember to
allow extra space (0.5 in. or 12.7 mm behind and on each side) for air
circulation. A cabinet with a minimum depth of 4.4 in. (112 mm) is
sufficient.
•
Take precautions so that metal cuttings do not enter any components
that are already installed in the panel.
•
Supporting panels should be at least 14 gauge to ensure proper
sealing against water and dust and to provide proper support. The
mounting hardware supplied accommodates panels up to 0.25 in.
(6.35 mm) thick.
Note: Supporting panels must be cut and drilled to
specifications prior to installation.
ATTENTION: Failure to follow these warnings may
result in personal injury or damage to the panel
components.
Dimensions
This section provides diagrams you need to follow to install the unit.
Figure 2
Dimensions (Front View)