Rockwell Automation Allen Bradley Bulletin 6185-C 15, Инструкция по установке и эксплуатации

Страница: 19 / 42

Industrial 15" Flat Panel Monitor 19
Publication 6185-5.1
Step 3 - Start the auto-adjust feature
1. Highlight the Auto Adjust option and press Select. The monitor will
attempt to adjust the settings properly based on the current signal.
This process may take up to 20 seconds, during which time the
screen will be dark.
2. Do one of the following:
•
If the display looks acceptable, go to Step 10.
•
If the display does not look acceptable, repeat the auto adjust
process two or three more times. If the display still does not look
acceptable, proceed to the next step.
Step 4 - Adjust the horizontal size
1. Highlight the Image Position option on the main menu and press the
Select button. Then highlight the Horizontal Size option and press
the Select button.
2. Adjust the horizontal size until the pattern of vertical shaded bars
disappears (refer to Figure 7). You should see each individual
vertical line in the setup image across the screen. Refer to the
following figure:
Note:
If you are running the monitor with a resolution other than
1024x768 (native mode), you will not see individual lines
in all cases. This is a result of the replication techniques
used to display the full image.
You can use the white border around the setup screen to set
up the horizontal size correctly.
Figure 8
Horizontal Size Adjustment