Rockwell Automation Allen-Bradley 1606-XLB90E, Справочное руководство

Страница: 7 / 24

Rockwell Automation Publication 1606-RM121A-EN-P - October 2020 7
AC Input
The device is suitable to be supplied from TN-, TT-, and IT mains networks
with AC voltage.
Attributes Values Notes
AC input Nom AC 100…240V —
AC input range
Min 90…264V AC Continuous operation
Min 264…300V AC For 500 ms max
Allowed voltage L or N to earth Max 300V AC Continuous according to IEC 62477-1
Input frequency Nom 50…60 Hz ±6%
Turn-on voltage Typ 55V AC Steady-state value, see Figure 1
Shut-down voltage Typ 47V AC Steady-state value, see Figure 1
External input protection
The device is designed, tested, and approved for branch circuits up to 32 A
(IEC) and 30 A (UL) without an additional protection device. If an external
fuse is used, do not use circuit breakers smaller than 6A B- or 4A C-
Characteristic. Smaller circuit breakers may cause a nuisance tripping of
the circuit breaker.
Attributes
Values
Notes
AC 100V AC 120V AC 230V
Input current Typ 1.69 A 1.45 A 0.95 A At 24V, 3.8 A, see Figure 3
Power factor Typ 0.6 0.58 0.45 At 24V, 3.8 A, see Figure 4
Start-up delay Typ 50 ms 50 ms 48 ms See Figure 2
Rise time
Typ 21 ms 21 ms 20 ms At 24V, 3.8 A constant current load, 0 mF load capacitance, see Figure 2
Typ 42 ms 42 ms 40 ms At 24V, 3.8 A constant current load, 2 mF load capacitance, see Figure 2
Turn-on overshoot Max 100 mV 100 mV 100 mV See Figure 2
Figure 1 - Input Voltage Range Figure 2 - Turn-on Behavior, Definitions
Turn-on
90V
Rated
input range
500 ms max
V
IN
P
OUT
300V AC 264V
Shut
-down
Start-up
delay
Rise
Time
Overshoot
- 5%
Output
Voltage
Input
Voltage
Figure 3 - Input Current Versus Output Load at 24V Output Voltage Figure 4 - Power Factor Versus Output Load at 24V Output Voltage
4 A 0 1 2
0
0.3
0.6
1.8 A
Input Current, Typ
3
0.9
1.2
b
c
a
a: 100V AC
b: 120V AC
c: 230V AC
1.5
Output Current
4.0 A 0.4 1.0 2.0 3.0
0.1
0.2
Output Current
0.3
0.4
0.5
0.6
Power Factor, Typ
a) 100V AC, 50 Hz
b) 120V AC, 60 Hz
c) 230V AC, 50 Hz
b
c
a