Rocktron Cyborg, Руководство по эксплуатации

Страница: 9 / 24

In addition the 2nd Function switch must be to the right in order to store any
changes you have made with the SOLO/Store Switch.
Note: When the 2nd Function mode is active the LED DISPLAY will have a distinctive vibrating
look. Once you have finished using the 2nd Function it is recommended that you exit the 2nd
Function mode by switching the 2nd Function switch to the left. This will avoid any possible
overwriting of preset data. So Please remember:
VIBRATING LED DISPLAY = Unprotected data. [2nd Function active ready to store on com-
mand ]
STEADY LED DISPLAY = Protected data. [Pedal in Normal performance mode ]
ON/OFF - PRESET SELECT MODE - RECALL Switch and LED - this
switch has three functions:
o ON/OFF - this switch is used to turn ON and OFF the Cyborg Dis-
tortion. When the LED is lit solid (not blinking) the distortion preset is active.
o PRESET SELECT MODE - You can change presets on the Cyborg
Distortion using the Preset Select Knob (Point 1) or you can use your foot
to select the preset. To enter the PRESET SELECT MODE press and hold
the ON/OFF - PRESET SELECT MODE - RECALL switch for less than 2
seconds. The LED above the switch will now be blinking and you will be in
PRESET SELECT MODE. Then use the SOLO/STORE PRESET SELECT
switch to scroll through the presets.
o RECALL (Preset Recall) Once you have selected the desired
preset with the SOLO/STORE PRESET SELECT switch you will see the
ON/OFF PRESET SELECT - RECALL switch led blinking which indicates
that the Cyborg is ready to “recall” or activate the selected preset whenever
you want to. Once the PRESET SELECT - RECALL switch is pressed again
the CYBORG DISTORTION will RECALL the preset then exit the PRESET
RECALL MODE and return to the NORMAL operation MODE .
The ON/OFF - PRESET SELECT MODE - RECALL switch will now func-
tion as the ON/OFF function
9
Descriptions Continued....