Rocktron Cyborg, Руководство по эксплуатации

Страница: 12 / 24

BASIC OPERATION
The Cyborg Distortion has 16 presets that are immediately available (with a
MIDI Pedal you can access 128 presets).
You will notice that on the LED Display there are presets numbered 1 through
8. Each of those presets has a “secondary” preset for a total of 16 presets.
For example, use the ON/OFF button to turn on preset 1. Then, use the SOLO/
STORE - PRESET SELECT button to activate the “SOLO” preset within
Preset 1. Thus, you have the Preset 1 plus the SOLO preset all within Preset
1. The same is true for Preset 2, you have Preset 2 and with the SOLO button
activated you have the SOLO preset.
The Cyborg Distortion is delivered with the presets already set up so that you
have a killer preset when you turn on the unit which is ideal for playing
rhythm and background parts. When you activate the SOLO mode you may
want more drive and volume so you can cut through the mix. This is how the
Cyborg has been pre-programmed for you.
This gives you the ability to have a 3 channel configuration per preset.
CLEAN = PEDAL IN BYPASS
CRUNCH= Distortion setup for Rhythm background work.
SOLO = Set up with more GAIN and LEVEL to cut through the mix.
However, note that you can change all parameters on all presets to suit your
needs, if you want the SOLO to actually be a different distortion all together all
you need to do is make the adjustments to the preset while in SOLO mode and
then STORE those changes.
Basic Operation