Rocktron Cyborg, Руководство по эксплуатации

Страница: 18 / 24

MIDI
The Cyborg Distortion pedal has a MIDI jack that allows you to access an addi-
tional 112 user presets. Using the included Rocktron MIDI Breakout cable you can
access these additional 112 presets (128 total) by using a Rocktron MIDI Controller
such as the Rocktron MIDI XChange, MIDI Mate or All Access. This will also al-
low you to connect and control additional Rocktron Cyborg pedals.
Note that all 128 presets on the Cyborg Distortion may be modified and stored.
When using the included MIDI Breakout cable to access the remaining 112 presets
you will find that these locations have the original factory presets already stored.
Example: Presets 1-8 are repeated in MIDI recall locations, 9-16, 17-24, 25-32,
33-40, 41-48, 49-56 and 57-64 and so on...
See MIDI connections using the included MIDI Breakout cable on the following
pages.
Connect MIDI XChange (or other Rocktron MIDI Controllers) to the CYBORG
using the included MIDI Breakout cable as shown in MIDI Connection 1 and 2.
1) To program any preset simply recall the preset to be programmed with your
MIDI CONTROLLER.
For Example, Recall preset 32 with your Midi Controller...
2) Now adjust the preset for both Crunch and Solo modes with control knobs to
make your desired changes.
3) Once you have created your preset enter the 2nd Function then press and hold
down the SOLO/STORE - PRESET SELECT Button on the Cyborg pedal until
the led indicates the store process is completed. (LED will hold bright then turn
off)
Cyborg MIDI Preset Programming