RockShox Reverb Stealth, Руководство по обслуживанию

Страница: 27 / 31

R E M O T E A N D H O S E B L E E D
1
Standard : Thread the hose barb into the poppet valve cover. Hold
the hose barb in position with a 7 mm open end wrench, and use a
10 mm crowfoot wrench to tighten the poppet valve cover to
3.4-4.5 N•m (30-40 in-lb).
Connectamajig : Thread the hose barb into the poppet valve cover.
Hold the hose barb in position with a 8 mm open end wrench, and
use a 10 mm crowfoot wrench to tighten the Connectamajig to 3.4-
4.5 N•m (30-40 in-lb).
2
Loosen the remote clamp bolt and rotate the remote so that the
bleed screw is at the highest point.
If there is a shifter installed on the matchmaker clamp, you will
need to remove it before adusting the clamp bolt.
3
Turn the speed adjuster barrel the opposite direction of the arrow
(counter clockwise) until it stops.
10 mm 8 mm 3.4-4.5 N•m (30-40 in-lb)
Connectamajig
10 mm 7 mm 3.4-4.5 N•m (30-40 in-lb)
Standard
T25
27
REMOTE AND HOSE BLEED