RockShox Reverb Stealth, Руководство по обслуживанию

Страница: 16 / 31

T O P C A P A S S E M B L Y S E R V I C E
N OT I C E
Use caution when servicing the Reverb Stealth seatpost not to scratch any sealing surfaces, being especially careful not to scratch the
upper post, the inside of the lower post, the inner seal head, or damage any o-rings or bushings.
Use aluminum soft jaws to prevent damage to the seatpost or any seatpost components when clamping into a vise. Clamp the shaft
only tight enough to prevent it from spinning in the soft jaws.
1
Clamp the top cap assembly by the wrench flats into a flat section
of the soft jaws. Use a downhill tire lever to pry the dust wiper from
the top cap. Remove the top cap from the vise. Use a pick to
remove the o-ring and foam ring.
N OT I C E
Tighten the vice only enough to hold the top cap securely in place
to prevent the top cap from becoming misshaped.
2 Install a new o-ring into the top cap.
16
TOP CAP ASSEMBLY SERVICE