8
Apply a liberal amount of SRAM Butter to the key slots. Reinstall
the brass keys into the slots. The orientation of the brass keys is
not critical.
When replacing the keys, make sure that the new keys have the
same number of etched lines as the old keys.
9
Slide the lower post over the upper post and onto the inner seal
head. Squeeze the inner seal head bushing, then slide the lower
post down and over the seal head bushing. Align the lower post
with the brass keys and ensure the laser etched RockShox logo is
lined up with the back of the seat post head.
10
Install a new bottom out bumper into the lower post.
11
355 & 420 mm Reverb Stealth with 100 mm travel, and 420 mm
Reverb Stealth with 125 mm travel:
Apply SRAM Butter to the
false bottom insert o-ring, then install it into the lower post.
Orientation of the false bottom insert is not critical.
23
REVERB STEALTH REASSEMBLY
Содержание Reverb Stealth
Страница 1: ...2014 REVERB STEALTH Service Manual...
Страница 31: ...www sram com GEN 0000000004211 Rev C 2015 SRAM LLC...
