38
Assembly - Damper Shaft, Eyelet, and Reservoir
Install the reservoir o-ring and alignment pin.
Ultimate RC2T, Ultimate DH RC2:
Thread the reservoir bolt closest
to the air valve, into the eyelet until the bolt head is about 3 mm from
contacting the eyelet.
Insert the other reservoir bolt into the bolt hole in the reservoir neck
until the bolt head clears the lever cap.
Ultimate RC2T pictured:
Procedure is the same for Ultimate DH RC2.
Position the slotted bolt groove in the reservoir neck around the
reservoir bolt head, slide the reservoir to the right, and install the
reservoir neck onto the eyelet.
Install the other reservoir neck bolt and thread it into the eyelet until it
contacts the reservoir neck. Thread the hidden bolt into the eyelet until
it contacts the reservoir neck.
Ultimate RC2T, Ultimate DH RC2:
Tighten each bolt to the specified
torque.
Ultimate RC2T pictured:
Procedure is the same for Ultimate DH RC2.
15
16
Ultimate RC2T, Ultimate DH RC2
Ultimate RC2T, Ultimate DH RC2
Ultimate RC2T, Ultimate DH RC2
Ultimate RC2T, Ultimate DH RC2
Ultimate RC2T, Ultimate DH RC2
Ultimate RC2T, Ultimate DH RC2
3 mm
2.8 N•m (25 in-lb)
3 mm
2.8 N•m (25 in-lb)
