13
Assembly - Damper Shaft and Eyelet
A s s e m b l y - D a m p e r S h a f t a n d E y e l e t
New damper shaft assembly:
Remove the rebound rod assembly from
the damper shaft if it is installed in the kit.
Ultimate RCT:
Apply grease to the rebound rod assembly (A) o-ring.
Install the (A) rebound rod assembly, tapered end first, into the (B)
damper shaft. The (C) keyed end of the rebound rod should protrude
from the end of the damper shaft.
New damper shaft assembly:
Remove the rebound poker assembly
from the damper shaft if it is installed in the kit.
RL, RT:
Apply grease to the rebound poker assembly
(A) o-ring.
Install the (B) rebound poker assembly, tapered end first, into the (C)
damper shaft until it stops.
1
RockShox Dynamic Seal Grease
Ultimate RCT
A
A
B
C
RockShox Dynamic Seal Grease
RL, RT
A
B
C
