Rocks OK-03.4130, Руководство пользователя

Страница: 72 / 106

72
MAINTENANCE AND STORAGE / KONSERWACJA I PRZECHOWYWANIE / WARTUNG UND LAGERUNG
/ KARBANTARTÁS ÉS TÁROLÁS / ÚDRŽBA A SKLADOVÁNÍ / ÚDRŽBA A UCHOVÁVANIE
7
7. MAINTENANCE AND STORAGE
- During maintenance operations, use the individual
protections indicated by the Manufacturer,
especially when intervening on the blade.
- Before performing maintenance operations, make
sure that the robot has stopped in safety conditions.
PROGRAMMED MAINTENANCE INTERVALS CHART
7.1 Robot cleaning
1. Stop the robot in safety conditions.
2. Wear protective gloves.
3. Clean all the outside surfaces of the
robot with a sponge soaked in warm
water.
4. Do not use solvents or
benzene so not to damage
the varnished surfaces and the
plastic components.
5. Do not wash the inside parts
of the robot and do not use
water jets in pressure so not to
damage the electric and the electronic components.
7.2 Robot Storage
Packed the mower and all spareparts with the
original package, and storage the carton off the
ground in a cool, dry place. Temperature should not
be colder than 14F° (-10°C)
7.3 Blade replacement
Blade replace steps:
1. Stop the robot in safe
conditions.
2. Wear protective
gloves.
3. Turn the Robot
upside down.
4. Unscrew the blade
and remove it.
5. Replace a new blade and screw it tightly.
7.4 Front wheel cleaning
When front wheels are not easy to rotate, please
turn robot upside down, check it and dismantle
the screw cap to take the front wheel out of robot,
dismantle end caps and remove the residues, like
mud, grass etc from end cap, then reinstall it on the
robot.
7.5 Battery
The battery is maintenance-free, but has a limited
life span of 1-3years. Battery life is dependent on
the length of the using season and how many hours
per week the robot is used. A long season or many
hours of use per week, means that the battery must
be replaced more regularly.
- Attentions of lithium batteries
Please charge the lithium batteries in accordance
with standard time and procedures.
When the power is too low. It should be started
charging as soon as possible.
Storage, we suggest the optimum storage of lithium
battery is with 80% power and keep in the shade.
Don’t connect the anode and cathode of battery.
Don’t take apart, repair or modify the battery
privately.
- Disused battery processing
Please contact the nearest waste treatment center
and consultation with recycling and proper disposal
of views.
6. Check the lower part of the robot (cutting blade
area and wheels) and remove the deposits and/or
residues that might obstruct the correct functioning
of the robot.
7. To remove the deposits and/or other residues
from the blade, use a suitable brush.
8. Clean the outside of the charging station from
any accumulated residues.
9. Keep all nuts, bolts and screws tight to be sure
the appliance is in safe working condition.
10. Replace worn or damaged parts for safety.
11. Ensure that only replacement cutting means of
the right type are used.
12. Ensure that batteries are charged by using the
correct charger recommended by the manufacturer.
14. In the event leakage of electrolyte flush with
water/neutralising agent, seek medical help if it
comes into contact with the eyes etc.
15. Servicing of the mower should be according to
manufacturers instructions. This product (include
battery pack) must be disposed of at a designated
collection pint for electrical and electronic waste.
For more information, contact your local city office
or the shop where you purchased the product.
EN
Frequency Component Type of operation Reference
Every week Blade
Clean and check
the efficiency of the
blade
See “Robot
cleaning”
If the blade is bent
due to an impact
or if it is worn-out,
replace it.
See “Blade
replacement"
Every month Robot Carry out cleaning See “Robot
cleaning"
Every 3
months
Robot Carry out for
rechage
See “Battery”
WARNING
Never use a high-pressure washer or even running water to
clean the robot.
IMPORTANT INFORMATION
Charge the battery fully at the end of the season before
winter storage. And recharge it every 3 months