Rocks OK-03.4130, Руководство пользователя

Страница: 11 / 106

11
2. VŠEOBECNÝ OPIS
V tejto kapitole sú uvedené informácie, s ktorými sa
oboznámte pred začatím montáže.
2.1 Obsah balenia
Havarijný vypínač
Stlačením tlačidla sa kosačka zapne. Stlačením tlačidla sa
kosačka vypne.
Ovládací panel
Koliesko nastavenia výšky kosenia
Nabíjací kontakt
Ostrie
Tlačidlo základnej polohy
Keď je kosačka spustená a stlačíte toto tlačidlo, kosačka sa
automaticky vráti do nabíjacej stanice.
Kontrolka nabíjania
Červené: nabíjanie
Zelené: stav plného nabitia / zariadenie nepracuje.
Kontrolka vytyčovacieho drôtu
Biele: pripojenie je správne
Červené: drôt je prerušený / zariadenie nepracuje
Svorka napájania
Svorka vytyčovacieho drôtu
červená svorka
čierna svorka
Otvor na kolík
Nabíjacia stanica
Nabíjačka
Vytyčovací drôt (100 m):
Je určený na vytyčovanie zóny kosenia a na vytvorenie
virtuálnej bariéry pre kosačku.
Prípojky vytyčovacieho drôtu (10 ks): Určené na pripojenie
vytyčovacieho drôtu.
Kolíky (100 ks):
Určené na upevnenie vytyčovacieho drôtu k pokladu,
okolo obvodu trávnika alebo okolo prekážok.
Náhradné ostria (3 ks)
Kolíky (4 ks):
Určené na upevnenie nabíjacej stanice k podkladu.
Používateľská príručka v slovenčine
Nabíjacia stanica
Prevádzkové diely:
13 Nabíjačka
14 Vytyčovací drôt na obkolesenie zóny kosenia (100 m)
15 Prípojky vytyčovacieho drôtu (10 ks)
16 Kolíky (100 ks)
17 Vymeniteľné ostria (3 ks)
18 Kolíky (4 ks)
19 Príručka
20 Kľúč na nastavenie výšky kosenia
PRESENTATION / OPIS OGÓLNY/ ALLGEMEINE BESCHREIBUNG / ÁLTALÁNOS LEÍRÁS / OBECNÝ POPIS /
VŠEOBECNÝ OPIS
- Lift sensor
There are lift sensors located between the top and middle
cover. If the mower is lifted from ground, it will stops
working within 1 second.
- Tilt sensor
There are tilt sensors installed on the mower too, when
the mower is tilted over 30 degrees in any direction, it
stops working within 2 seconds.
- Bump sensor
The bump sensors that will activate when the mower
strikes solid, fixed object when that object is at least 6cm
6cm in vertical height from the supporting surface of the
mower. When the bump sensor activated, the mower will
back up for working.
- Rain sensor
There are two rain sensors located on the mower.
The mower will go back to the charging station
automatically when it’s raining.
Rain sensors can be selected ON/OFF from APP.
Turn on: the mower will go back home if it is raining. Turn
off: the mower will go on mowing when it is raining.
- Wifi
The IOS user can search “EGROBOT” in the Apple Store to
download the application.
The Android user search “EGROBOT” in the Google Play
to download the application.
- Area working time setting(mowing schedule)
Set up one week (From Monday to Sunday, once for each
day) cutting schedule from APP. This function should be
used together with Area location setting.
- Cutting width: 18cm
- Easy cutting height adjustments
The cutting height could be adjusted on the mower
bottom cover cutting height adjustment knob via the
equipped spanner.
- Auto recharge system
When the mower senses a low battery situation, it will
shut off the cutting motor and search for the virtual wire.
Once found it will follow the virtual wire to the charging
station for recharge automatically. Once charging is
complete, the mower will back up a few centimeters ready
to go again in stand by mode.
- Emergency stop switch
There is an emergency button located on the top of
mower and in red color.
Press it to turn on the mower.
Press it again to turn off the mower.
- Two cutting modes
There are two cutting modes of the mower, go straight
and go circle (high efficiency).
In Auto, mower selects cutting mode intelligently.
It goes straight if the grass is sparse or it has be cut off,
and it goes circle if the grass is dense or long.
In manual mode, the mower will go where you direct it.
- Virtual wire
The robot lawn mower can’t be operated without a virtual
wire. (we suggest to use 100m-600m of virtual wire).
The mower will follow virtual wire to charging station, the
virtual wire acts as a virtual fence. It will get on the virtual
wire until it meets charging sheets, then it gets off from
virtual wire and starts cutting inside.
SK
EN