Rocks OK-03.4130, Руководство пользователя

Страница: 55 / 106

55
3. Area working-time setting
3. For the functions like rain sensor, touch sensor,
audio alarm are optional.
Rain sensor:
ON: mower goes back to charging station when it is
raining.
OFF: mower goes on working when it is raining.
After finish setting function, pls press Send to save
the settings.
6.3 Date&Week&Time settings
1. You can synchronize the
mower time to cellphone
time.
2. After setting new time,
pls press Send to save the
settings.
6.4 Working Area Setting
1. This function is to increase
the mowing efficiency
for large area.lt allows to
separate a large area into
maximum 6 small areas.
2. Area location setting
2.1 before entering into this
interface, pls separate the
garden into several areas
as per your own demand. Take separate 3 areas for
example below:
- Route the wire around the passage to separate
the area.The virtual wire to and from the edge of
passage is 1 meter at least.pls refer to below picture.
- A minimum distance between the virtual wire
which is to make passage is 50cm.
2.2 choose the areas that you set accordingly:
2-1Area 1 is non-optional,selects by default. 2-2After
select Area, the symbol * will be in red color.
2-3 Start locating to set memory point.
A memory point is to program the where to leave
virtual wire and go inner lawn.Each area needs a
memory point.
- Route the wire around the passage to separate
the area.The virtual wire to and from the edge of
passage is 1 meter at least.pls refer to below picture.
- A minimum distance between the virtual wire
which is to make passage is 50cm.
2.2 choose the areas that you set accordingly:
2-1Area 1 is non-optional,selects by default. 2-2After
select Area, the symbol * will be in red color.
2-3 Start locating to set
memory point.
A memory point is to
program the where to
leave virtual wire and
go inner lawn.Each area
needs a memory point.
Pls make sure the mower
voltage more than 27V
before setting the memory
points,and pls put the
mower at charging station
before locating.
-It is best to set the
memory point in the
middle of two corners.
- A better position of memory point is 3meter
distance from the beginning or the end of an area.
EN