Distributed by Rockler Companies, Inc.
Medina, MN 55340
57559
Rev 09/17
8
Fig. 7
Fig. 8
3. Position the outfeed table so the Aluminum Ramp is no
more than 1" from the back of your saw’s table.
Fig. 7.
Check Rockler.com for updates. If you have further questions, please
contact our Technical Support Department at 1-800-260-9663
4. To store the outfeed table after use, remove the Pivot
Locking Pin, tilt the top upright and reinstall the Pivot
Locking Pin into the holes for storage.
Fig. 8.
Setting the outfeed support higher
than the table could lead to trapping, binding and
dangerous kickback of the workpiece that could result
in serious personal injury.
Placing the Outfeed Table more than 1" from the
back of the table saw may cause the material to
catch on the Outfeed Table leading to the Outfeed
Table moving suddenly and the material unexpectedly
shifting or failing.
Outfeed Table does NOT lock when
in the upright position (see Fig. 8). Use care when
storing and moving to avoid injury, unexpected tipping
and property damage.
1" maximum distance
between table saw
and outfeed table
Store Locking
Pivot Pin when
tilted upright
