7
Top must be in horizontal position with
Pivot Locking Pin secured during use. Failure to lock
top in horizontal position could lead to unexpected
tipping and dangerous workpiece shifting.
2. Adjust the height of the Outfeed Table top so that it is
level to or just below the surface of your saw’s table.
Fig. 5. Level it overall by turning the feet on the base
as necessary.
Fig. 6.
Fig. 5
Fig. 6
Maximum Outfeed Table support
height is 42
1
⁄
2
".
Table saw should be
horizontal
and
either
even
with the top of
the Aluminum Ramp or
above
it
Outfeed table should be level or
below the surface of the table saw
Side Arm
