Rockford Fosgate OEQ2 HIGH, Руководство по установке и эксплуатации

Страница: 6 / 40

D
ESIGN
F
EATURES
– 3 –
6
RIGHT LEFT
LEFT
IN
RIGHT
IN
GND B+ REM
BAL IN RCA
BAL
BYPASS
ENGAGE
1 4 3 2 12
6
RIGHT LEFT
7
BAL OUT
1. RCA Input Jacks – The industry standard RCA jacks provide easy
connections for signal level input. They are gold-plated to resist the
signal degradation caused by corrosion.
2. Balanced Line Input – This input will allow the optional Balanced
Line Transmitter to be used for better noise rejection.
3. Signal Input Switch– This switch allows selection of either RCA or
Balanced Line inputs.
4. Engage/Bypass Switch – This switch enables the OEQ
2
to process the
signal or bypass the Boost/Cut and Frequency Warp controls for a
“dry” output.
5. Input Sensitivity Controls – The input sensitivity controls are preset
for 500mV which will match the output of most source units. They
can be adjusted to match input levels ranging from
500mV to 9.3V.
6. RCA Output Jacks – The RCA Output Jacks provide a parallel output
and are used to connect the signal to the next component's input
jacks. They are gold-plated to resist the signal degradation caused by
corrosion.
7. Balanced Line Output – The balanced output allows a balanced line
cable to be used between the output of the OEQ
2
and the input of the
next component to provide better noise rejection.