Rockford Fosgate OEQ2 HIGH, Руководство по установке и эксплуатации

Страница: 24 / 40

T
R O U B L E S H O O T I N G
Symptom Diagnosis Remedy
– 21 –
OEQ
2
does not
turn on (Power
LED is off)
Check the alternator, bat-
tery, fuse and wiring and
repair as necessary. If the
voltage is above 15.5 volts,
have the electrical system
inspected by an authorized
car service center.
Check the alternator, bat-
tery, fuse, and wiring and
repair as necessary. If the
voltage is above 15.5 volts,
have the electrical system
inspected by an authorized
car service center.
Remove cover from OEQ
2
and replace with 2 Amp fuse.
Check wiring and repair as
necessary.
Check connections, substi-
tute with known working
source and cables, and re-
pair or replace as necessary.
Check connections, substi-
tute with known working
BLT cables and repair or re-
place as necessary.
Readjust output attenuators
as necessary.
Voltage applied to the
REM terminal of the
OEQ
2
is not between 5
and 15.5 volts.
Voltage to the B+ termi-
nal of the OEQ
2
is not
between 5 and 16 volts
or there is no voltage
present.
Internal B+ fuse is blown
OEQ
2
is not properly
grounded.
OEQ
2
has no sound
(Power LED is on)
RCA Input from source
unit is not connected or
not functioning properly.
When using the BLT,
Balanced Line Input from
BLT is not connected or
not functioning properly.
Output attenuators are at
minimum.
TROUBLE- S
H
O
O
T
I
N
G