Rock Shox BoXXer R2C2, Техническое руководство

Страница: 5 / 21

GEN.0000000003185 REV A 5
geTTing sTarTed (ConTinued)
The following chart lists all of the oil volumes and weights for your BoXXer as well as tool sizes and torque values for all of the
fasteners.
oil voluMe CharT
damper
technology
( drive side )
volume
(mL)
Height
(mm)
Oil wt volume
(mL)
Oil wt
Spring
technology
( non-drive side )
volume
(mL)
Oil wt
volume
(mL)
Oil wt
Upper leg Lower leg Upper leg Lower leg
BoXXer R2c2 mission control dH 239 173 5 10 15 coil with drop Stop - - 40 15
TorQue CharT
Part/fastener Tool size Torque
maxle dH (non drive-side) 6 mm 8 clicks
maxle dH (drive-side) 6 mm 5.7 N·m (50 in-lb)
crown bolts 4 mm 7.3 N·m (65 in-lb)
Bottom bolts 5 mm 7.3 N·m (65 in-lb)
Top caps 24 mm 7.3 N·m (65 in-lb)
serviCe inTervals
The following chart is a summary of the maintenance/service intervals for BoXXer forks. Following this schedule is important to ensure
the consistent performance and longevity of your fork. Some of the information listed may not be applicable to your fork.
maintenance Interval (Hours)
clean dirt and debris from upper tubes every ride
check air pressure (air forks only) every ride
Inspect upper tubes for scratches every ride
Lubricate dust seals and upper tubes every ride
check front suspension fasteners for proper torque 25
Remove lowers, clean/inspect bushings and change oil bath (if applicable)
25
clean and lubricate air spring assembly
50
change oil in damping system 100
clean and lubricate coil spring assembly (coil forks only) 100
bo
XX
er r2C2 TeChniCal Manual