Get your model ready to fly
1.
Glue the two pieces tear drop mass
weight to the notch under the elevator
as the picture shows.
1.
Thread the nylon wire through the eyelets
on top of the lower wing and cut the wire
with enough length.
2.
Connect the wire ends to the spring
hook and hook the springs the top wing
root eyelets.
Note
: Close the hook which connect with
the wire using a needle nose pliers and
make sure the wire is tension enough to
hook firmly on the eyelets.
1.
Glue the two pieces antenna masts to the
top wing as the picture shows.
3.
Verify the completed flying wire
connection status.
Install the tear drop mass weight
Install the antenna
Connect the flying wires
page18
1
1
1
2
3
For More Info Vist: www.motionrc.com
Содержание Beechcraft
Страница 1: ...Email info motionrc com Http www motionrc com...
Страница 2: ...Beechcraft...