Roc Hobby Beechcraft, Руководство по эксплуатации, Страница: 13 / 28

Install the interplane strut
page9
Mount the top wing
4. Secure the lower wing using four pieces
machine screws, two front pieces are
PM 3.0*30, two rear pieces are PM3.0*40.
2. Make sure the strut can be fully fitted into
the notch. The strut will incline toward the
leading edge side of the top wing.
1. Fit any of the interplane struts to the top
wing, there are no different between the
strut. The tooth will be guiding to position
the struts.
Note: Not any glue are allowed to use in
this step.
1. Thread the aileron leads from the top wing
saddle to the receiver hatch before sliding
the top wing into place.
3. Apply glue to the mating edge where it fit with
the top wing and glue the strut into place.
2. Slide the wing into place, make sure the
dowels in front of the wing will fit into the
mounting holes and the other end of the strut
will fit properly into the lower wing.
Note: Slightly pull he aileron leads from the
receiver hatch end to avoid any tangling.
Assemble the plane
2
4
3
2.1
1
1
For More Info Vist: www.motionrc.com