The transmitter and model setup
page15
Get your model ready to fly
Before getting started, bind your receiver with your transmitter. Please refer to your
Transmitter Manual
for proper operation.
CAUTION
: To prevent personal injury, DO NOT install the propeller assembly onto the
motor shaft while testing the control surfaces . DO NOT arm the ESC and do not turn on
the transmitter until the
Transmitter Manual
instructs you to do so.
Tips:
Make sure all control sticks on your radio are in the neutral position (rudder,
elevator, ailerons) and the throttle in the OFF position. Make sure both ailerons
move up and down (travel) the same amount. This model tracks well when the
left and right ailerons travel the same amount in response to the control stick.
1.
Move the controls on the transmitter to make sure aircraft control surface move
correctly. See diagrams below.
Aileron
(Top wing)
Elevator
Steering
Rudder
Bank Left
Bank Right
Climb
Descend
Steer/Yaw Left
Steer/Yaw Right
For More Info Vist: www.motionrc.com
Содержание Beechcraft
Страница 1: ...Email info motionrc com Http www motionrc com...
Страница 2: ...Beechcraft...