Robustel GoRugged R3000 User Guide
RT_R3000_UG_v01.01
Confidential
15.03.2013
63 /
82
Protocol
Select from “TCP server” or “UDP”
UDP
Local IP
You can enter the IP address of cellular WAN, Ethernet WAN or Ethernet LAN.
Null stands for all these three IP addresses.
0.0.0.0
Local Port
Enter the local TCP or UDP listening port.
8091
3.24
Configuration -> Reboot
This section allows users to set the Reboot policies.
Reboot
Item
Description
Default
Enable(hh:mm,24h)
Enable daily reboot, you should follow hh:mm,24h time frame, or the data will
be invalid.
Disable
Reboot Time1
Specify time1 when you need router reboot.
Null
Reboot Time2
Specify time2 when you need router reboot.
Null
Reboot Time3
Specify time3 when you need router reboot.
Null
3.25
Configuration -> Syslog
This section allows users to set the syslog parameters.
Syslog
Item
Description
Default
Save Position
Select the save position from “None”, “Flash” and “SD”. “None” means syslog is
only saved in RAM, and will be cleared after reboot.
NONE
Log Level
Select form “DEBUG”, “INFO”, “NOTICE”, “WARNING”, “ERR”, “CRIT”, “ALERT”
and “EMERG” which from low to high. The lower level will output more syslog in
detail.
DEBUG
Keep Days
Specify the syslog keep days for router to clear the old syslog.
14
Log to Remote System
Enable to allow router sending syslog to the remote syslog server. You need to
enter the IP and Port of the syslog server.
Disable
