Robustel GoRugged R3000 User Guide
RT_R3000_UG_v01.01
Confidential
15.03.2013
26 /
82
3.9
Configuration -> Link Management
This section allows users to set the WAN link and the related parameters.
Link Management
Item
Description
Default
WAN Link
Selected from “Cellular Only”, “Eth0 Only”, “Eth0 as primary and if fail use cellular”
and “Cellular as primary and if fail use Eth0”.
Cellular Only: Select to make cellular as the only WAN link.
Eth0 Only: Select to make Eth0 as the only WAN link
Eth0 as primary and if fail use cellular: Select to make Eth0 as the primary WAN link
and cellular as the secondary WAN link.
Cellular as primary and if fail use Eth0: Select to make cellular as the primary WAN link
and Eth0 as the secondary WAN link.
Cellular
Only
ICMP Detection
Primary Server
Router will ping this primary address/domain name to check that if the current
connectivity is active.
Null
ICMP Detection
Secondary Server
Router will ping this secondary address/domain name to check that if the current
connectivity is active.
Null
ICMP Detection
Interval
Set the ping interval time.
Null
ICMP Detection
Timeout
Set the ping timeout.
30
ICMP Detection
Retries
If Router ping the preset address/domain name time out continuously for Max Retries
time, it will consider that the connection has been lost.
3
Reset
The
Interface
Enable to reset the cellular/ETH0 interface after the max ICMP detection retries.
3