Robustel GoRugged R3000 User Guide
RT_R3000_UG_v01.01
Confidential
15.03.2013
45 /
82
Server
Server @ Open VPN
Item
Description
Default
Enable OpenVPN
Server
Tick to enable OpenVPN server tunnel.
Disable
Tunnel name
Name the OpenVPN server tunnel.
Tunnel_OpenVPN_0
Listen IP
You can enter the IP address of cellular WAN, Ethernet WAN or Ethernet
LAN. Null or 0.0.0.0 stands for using the active WAN link currently-cellular
WAN or Ethernet WAN.
0.0.0.0
Protocol
Select from “UDP” and “TCP Client” which depends on the application.
UDP
Port
Set the local listening port
1194
Interface
Select from “tun” and “tap” which are two different kinds of device
interface for OpenVPN.
The difference between a tun and tap device is this: a tun device is a
virtual IP point-to-point device and a tap device is a virtual Ethernet
device.
tun
Authentication
Select from four different kinds of authentication ways: “Pre-shared”,
“Username/Password”, “X.509 cert” and “X.509 cert+user”.
None
Local IP
Define the local IP address of OpenVPN tunnel.
10.8.0.1
Remote IP
Define the remote IP address of OpenVPN tunnel.
10.8.0.2
Enable NAT
Tick to enable NAT Traversal for OpenVPN. This item must be enabled
Disable
