RoboSense RS-LiDAR-M1 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 54

RoboSense RS-LiDAR-M1 Скачать руководство пользователя страница 39

·

RS-LiDAR-M1 User Guide

packet message when recording the ROS packet offline.

send_packet_proto

：

true – LiDAR packet message will be sent through Protobuf-UDP, false – forbidden.

send_point_cloud_proto

：

true – LiDAR point cloud message will be sent through Protobuf-UDP, false – forbidden.

We recommend sending packet messages instead of point cloud messages, because

point cloud messages are too large and has higher requirements on bandwidth.

pcap_path

：

If msg_dource = 3, please ensure that this parameter is set to the correct absolute path of
the pcap package.

B.2.3.2 LiDAR Part Parameters

This part of parameters needs to be set for each LiDAR according to their specific

status.

lidar:
    - driver:
            lidar_type: RSM1
            frame_id: /rslidar
            msop_port: 6699
            difop_port: 7788
            start_angle: 0
            end_angle: 360
            min_distance: 0.2
            max_distance: 200
            use_lidar_clock: false
        ros:
            ros_recv_packet_topic: /rslidar_packets
            ros_send_packet_topic: /rslidar_packets
            ros_send_point_cloud_topic: /rslidar_points
        proto:
            point_cloud_recv_port: 60021
            point_cloud_send_port: 60021
            msop_recv_port: 60022
            msop_send_port: 60022
            difop_recv_port: 60023
            difop_send_port: 60023
            point_cloud_send_ip: 127.0.0.1
            packet_send_ip: 127.0.0.1

lidar_type:

the currently supported LiDAR types are listed in the sdk file in the README

folder.

RS-LiDAR-M1

belongs to type

RSM1

。

frame_id:

the frame_id of point cloud messages.

msop_port, difop_port:

The msop port number and difop port number of the point cloud.

If cannot receive messages, please first check whether these two parameters are
configured correctly.

«
...
37
38
39
40
41
...
»

Содержание RS-LiDAR-M1























































Отзывы:

Нет отзывов