ROBOT S6
‒
Replace the components ONLY with ORIGINAL PARE PARTS or with SIMILAR design and functional
features.
The use of similar but non-original spare parts may lead to improper repairs, altered performance and
economic damage.
The components and/or safety devices shall be replaces ONLY with original spare parts to
avoid altering the provided safety level.
‒
Use lubricants (oils or grease) recommended by the manufacturer or with similar chemical-physical
features.
‒
Do not dump into the environment polluting liquids, worn parts and maintenance waste.
‒
Select the components according to the chemical and physical features of the material and carry out
the differentiated waste disposal as per the standards in force.
‒
All the extraordinary maintenance interventions shall be carried out EXCLUSIVELY by authorised
personnel with particular expertise in the field of intervention.
Non compliance with the instructions given may cause risks for safety and health of the
persons and economic damages.
2.7. SAFETY WARNING FOR ELECTRICAL EQUIPMENT
The electrical system has been designed and built in compliance with applicable legislation.
This legislation also specifies the ambient conditions required for operation.
The following list specifies ambient conditions necessary to ensure correct electrical system function.
―
Ambient temperature must be between
5°C
°C and
40°C
.
―
Relative humidity must be between
50%
(measured at
40°C
) and
90%
(measured at
20°C
).
―
The installation area must not be subject to or contain sources of electromagnetic interference or
radiation (X rays, laser light etc).
―
The installation area must not contain potentially explosive or flammable mixtures of gases or dust.
―
No contaminant or corrosive products (acids, chemicals, salts etc.) may be used during production and
maintenance. Any products used must be kept away from electrical components.
―
The ambient temperature during storage must be between
- 25°C
and
55°C
.
―
Electrical equipment may be exposed to temperatures up
70°C
, provided that exposure does not
exceed
24
hours.
―
The electrical system will function correctly up to an altitude of
1000 m
above sea level.
If any of the aforementioned conditions cannot be met, any additional measures necessary to
ensure safe operating conditions (e.g. special electrical components, air conditioning systems
etc.) must be defined during the contractual stage.
2.8. INFORMATION AND SAFETY SIGNALS
The figure indicates the position of the safety and information signs affixed to the machine.
12/94
Содержание S6
