Robopac S6, Руководство по эксплуатации и обслуживанию, Страница: 10 / 94

ROBOT S6
‒ DO NOT allow the machine to be used by operators that are not properly trained, informed and
unauthorised.
‒ Do not use the machine as a lifting device or as a rest surface for work activities (for example, a
workbench).
‒ NEVER use the machine if the scheduled maintenance interventions have not been carried out
accordingly.
‒ If troubles arise, do NOT continue to use the machine. Stop it immediately and restart only after
restoring the normal operating condition.
‒ DO NOT carry out interventions different from those indicated in the user manual without the written
consent of the manufacturer.
‒ NEVER carry out an intervention with the machine enabled but ONLY after having stopped it properly,
under safety conditions.
‒ DO NOT clean or wash the machine with aggressive products to avoid damaging the components.
‒ DO NOT replace the components with non-original spare parts or with different design and constructive
features.
‒ DO NOT leave the machine unattended at the end of the work without shutting it down first in safety
conditions.
‒ DO NOT allow people to walk through or stand within the working area of the machine during the
wrapping cycle.
2.4.2.EMPLOYER OBLIGATIONS
‒ The operator must possess the required training and meet the suitable conditions for carrying out the
activities in safety conditions.
‒ The employer must inform the operator on the INCORRECT USES predictable and on the persistent
Residual risks.
‒ The operator must be capable of reading and understanding the user manual and must easily identify
the safety signs.
The employer must draw up the documentation of the specific training carried out by the
operators in order to exhibit it in case of litigation.
2.5. SAFETY WARNINGS ON RESIDUAL RISKS
When designing and building the machine, the manufacturer has paid particular attention to the RESIDUAL
RISKS that may affect the safety and health of the operators.
The residual risks are: “all the risks that persists although all safety solutions have been applied and
integrated during machine design”.
The list specifies the residual risks specific for this type of machine.
‒ Upper limb cutting hazard
Do not place hands inside components in
motion.
10/94