Robopac Compacta S4 Скачать руководство пользователя страница 17

Страница: 17 / 115

SAFETY INFORMATION

ENG

2.6. SAFETY WARNINGS FOR ADJUSTMENTS AND MAINTENANCE

Keep the machine in maximum efficiency conditions and perform all the scheduled maintenance operations

provided for by the Manufacturer.

Proper maintenance will provide the best performance, a longer life span and constant compliance with safety

requirements.

Enable all machine safety devices before performing any maintenance and adjustment operations.

Demarcate the surrounding areas and put in place adequate safety measures, as provided for by the standards

on workplace safety, in order to prevent and minimise the risks.

Maintenance interventions in areas that are not easily accessible or dangerous must be carried out after having

ensured the necessary conditions are met.

The personnel authorised to carry out the ordinary maintenance (adjustments, replacements etc.) must possess

the necessary technical and professional knowledge and skills.

Do not carry out interventions other than those indicated in the user manual without the express authorisation

of the Manufacturer.

Do not use products that contain corrosive and flammable substances or that are harmful to people's health.

Wear Personal Protective Equipment as required by labour laws and as indicated in the "Instructions for Use"

and/or on the machine.

The use of similar but non-original spare parts may result in improper repairs, altered performance and economic

damage.

Use lubricants (oils or grease) recommended by the Manufacturer or with similar chemical-physical features.

Do not dispose of polluting liquids, worn parts and maintenance waste into the environment.

Select the components according to the chemical and physical features of the material and dispose of them

separately in accordance with the applicable laws.

All the extraordinary maintenance interventions shall be carried out only by authorised personnel with

experience and expertise in the field of intervention.

Important

Non-compliance with the instructions given may cause risks to the safety and health of people, as

well as economic damages.

2.7. SAFETY WARNING FOR THE ELECTRICAL EQUIPMENT

The electrical equipment has been designed and manufactured in accordance with the relevant standards.

These standards consider operating conditions based on the surrounding environment.

The list contains the conditions necessary for the correct operation of the electrical equipment.

Ambient temperature must be within

5°C

and

40°C

The relative humidity should be between 50% (measured at

40°C

) and 90% (measured at

20°C

The installation environment must be immune to and must not be a source of electromagnetic interference or

radiation (x-

rays, lasers, etc․).

The environment must not have areas with concentrations of gas and dust that are potentially explosive and/or

with a fire risk.

The products and materials used during production and maintenance must not contain contaminants or

corrosive agents (acids, chemicals, salts, etc․) and must not be able to penetrate and/or come into contact with

electrical components.

During transport and storage, the ambient temperature must be between -2

5°C

and

55°C

The electrical equipment may still be exposed to a temperature of up to

70°C

provided that the exposure time

does not exceed 24 hours.

The electrical equipment operates correctly up to 1000 m above sea level.

Important

If it is not possible to comply with one or more of the conditions listed, which are essential for the correct

operation of the electrical equipment, it is necessary to agree at the contractual stage which additional

solutions to adopt in order to create the most suitable conditions (e.g. specific electrical components, air

conditioning equipment, etc․).

Содержание Compacta S4




















































































































Результаты поиска

Содержание Compacta S4

Отзывы:

Похожие инструкции для Compacta S4

Бренды по названию

Популярные бренды

Robopac Compacta S4, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Compacta S4

Отзывы:

Похожие инструкции для Compacta S4

Бренды по названию

Популярные бренды