Robopac Compacta S4 Скачать руководство пользователя страница 14

Страница: 14 / 115

ENG

SAFETY INFORMATION

2.4. SAFETY WARNINGS RELATED TO MISUSE

2.4.1. REASONABLY FORESEEABLE MISUSE

The reasonably foreseeable misuse is: “the use of the machine in a way other than that indicat

ed in the manual,

that may stem from the easily predictable human behaviour”.

The machine must be used only for wrapping and stabilising products with regular shape or with a shape that

ensures a stable wrapping.

Packages containing liquids or insubstantial materials must have characteristics suitable to the product and be

perfectly closed and sealed to prevent the contents from flowing out.

Do not palletize or wrap products housed in irregularly shaped packages (boxes, liquid containers, etc.) or

packages that do not guarantee their stability.

The machine should only be used for the uses intended by the Manufacturer.

Do not allow the machine to be used by operators that are not properly trained, informed and authorised.

Packages containing liquid or insubstantial products must ensure that they do not leak out.

Do not wrap bulk products of irregular shape and improperly collected to avoid an unsuitable palletization.

Do not use the machine to wrap and stabilise living beings (animals and persons).

Do not use the machine with wrapping material other than that provided by the Manufacturer.

Do not use the machine as a lifting device or as a work surface (e.g. workbench).

Do not stretch or pre-stretch the film excessively and do not wrap the product with too many wrappings in order

to prevent damaging the packages and the products contained in them.

Do not use or let the machine be used for purposes or in ways other than those intended by the Manufacturer.

Do not use or let the machine be used with defective, deactivated and/or incorrectly installed safety devices.

Do not continue to use the machine if malfunctions have been detected.

Stop the machine immediately and restart it only after the normal conditions of use have been restored.

Never carry out an intervention with the machine in operation, but only after stopping it properly, under safety

conditions.

Never use the machine without wearing the Personal Protective Equipment indicated by the Manufacturer and

provided for by the laws in force on workplaces.

Never use the machine if the scheduled maintenance interventions have not been carried out.

Do not clean or wash the machine with aggressive products to avoid damaging the components.

Do not replace the components with non-original spare parts or part with different design and construction

features.

Do not leave the machine unattended at the end of the production activity without shutting it down first in safety

conditions.

2.4.2. EMPLOYER OBLIGATIONS

The operator must be trained to acquire the required skills in the field of packaging machines or equivalent.

Upon completing the training, ensure that the operator has understood the entire content of the operating

manual, in particular the safety information.

The operator must have the required skills and must be fit for the activities to be carried out in safety conditions.

The employer must inform the operator on the reasonably foreseeable misuses and on the persistent residual

risks.

The operator must be capable of reading and understanding the user manual and must easily identify the safety

signs.

Allow the machine to be used only by operators that are properly trained, informed and authorised.

Important

The employer must record the specific training carried out by the operators in order to exhibit it in

case of litigation.

Содержание Compacta S4




















































































































Результаты поиска

Содержание Compacta S4

Отзывы:

Похожие инструкции для Compacta S4

Бренды по названию

Популярные бренды

Robopac Compacta S4, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Compacta S4

Отзывы:

Похожие инструкции для Compacta S4

Бренды по названию

Популярные бренды