RoboJet Duel, Инструкция по эксплуатации

Страница: 15 / 40

14
EN
Installation method of Space Isolator:
1.
The Space Isolator is placed at the entrance to the stair or room generally. You can place the Space
Isolator at proper position to stop the Cleaner passing through some places.
2. Remove obstacles from the area you want to block in front of the Space Isolator as much as possible for
fear of poor effect.
IMPORTANT:
1. The Space Isolator should be placed at the same level of the ground where the Cleaner is running.
2. You should check whether the Cleaner can pass the Space Isolator while using it first.
3. The distance between the Space Isolator and charger should be more than 3m, or there will be
interference.
4. The Docking Station should not be installed within the signal scope of the Space Isolator.
Trouble shooting:
The Cleaner doesn’t work or clean poorly
1. Check whether is on the switch.
2. Check whether the dust box, filter and intake are clean, and whether the side brush works.
3. Check whether the battery voltage declines greatly.
The remote control doesn’t work
1. Check the battery status of the remote control.
2. Check the battery status of the Robot.
3. Check whether the remote control is within the available scope of the signal transmitting.
The Cleaner cannot charge automatically
1.
Check whether the adaptor is connected well with the charger and whether power LED of the
recharger lighting.
2. Check whether the battery power is too low; if so, charge the Cleaner with the adaptor directly.
3. Make sure there is no barrier in front of the Docking Station.
4. Use the remote control to let the cleaner go back to the Docking Station.
Increased noise in cleaning
1.
Clean the dust box and filter.
2. Check whether the brush or side brush is too dirty.