RoboJet Duel, Инструкция по эксплуатации

Страница: 16 / 40

15
EN
The Cleaner stops working suddenly and rings intermittently
1.
Check whether the set cleaning time is over.
2. Check whether there are failure codes on the display by reference of the followings.
The cleaner back off continuously
1.
Avoid use in sunlight or dark colour carpet.
2. Pat the front bumper.
The cleaner dropped from the stair
Clean the ground detection sensors at the front bottom of the cleaner
The cleaner cannot Auto-Charging after didn’t use in a long time
Use the adaptor to full charged first.
Failure Code Failure Cause How to solve
E001-E004
Edge detection
sensors
Clean the sensors on the bottom of the robot.
E005-E006
Collision detection
sensors
Check if there are foreign object between infrared signal receiver
and the shells. Check if it can turn back after pressing.
E007-E015,
E027-E030
Hardware
malfunction
Turn off the device, remove the battery for 10 minutes and put it
back . If the error persists send the Cleaner to authorised aftersales.
E016 Middle brush Clean the rubbish such as hair ,thread wrapped on the brush.
E017 Fans system Clean the foreign object in the fans or check if it's broken.
E018 Low battery Use the adaptor to charge before use it again.
E019-E020 Left & right wheel Left &right wheel malfunction, send to maintenance station.
E022-E023
Left & right wheel
float off
Check if the wheel float off the ground.
E031-E032
Wheel electric
current beyond
standard
Check the bottom of the cleaner, clean the rubbish.
E033
Short of dust box
or bad contact.
Check the dust box, assemble again.
If the failure still exist after the above check, please contact the after-sale service maintenance,
professional maintenance staff or the technical center of the company, don’t disassemble and
maintain it by yourself..
Technical Specification:
Rated Voltage Li-ion 14.8V
Battery
Rechargeable battery (the charge time is about 4-5 hours)
Working hours 90 - 120 minutes