RoboJet Duel, Инструкция по эксплуатации

Страница: 13 / 40

12
EN
1. The Cleaner may fail to find the Docking Station due to the obstacle, complex
conditions or because the battery power used up.
2. Do not force to press ▲ button while there is a gap or stair in front of the
vacuum cleaner, otherwise, the vacuum cleaner will falling down.
Auto Charging Docking Station:
Docking Station Display and Control Panel:
Overall display Function display
1. Power indicator
2. Charge indicator
3. Infrared signal transmission window
4. Charging positive
5. Charging negative
6. Power adapter charging socket
Using method and function condition of charging base:
No Function guideline Functional information
1 Power indicator Plug the power in the charging base, the power indicator is
light, or it is off.
2 Charge indicator When the charging base is connected to the host for
charging, indicator is flashing.
3 Signal transmission Transmitting signal is the only path to guide the host to
return to charging base to charge. Therefore, transmitting
signal shall be kept clean permanently, don’t cover
something above it, so as to avoid affecting the signal
effect.
4-5 Recharge positive and negative
electrodes
Connect the two electrodes with the two electrodes of the
host.
6 Power adapter charging socket Connection jack of the output DC19V of power adapter.
Charging base is the transit station of the host and power
adapter when charging, so when using charging base, it
must be close to the edge of the wall. At the same time,
power adapter connector must be far away from the
charging base, don't put it on two sides of charging base,
so as to avoid collision, entanglement when the vacuum
cleaner is cleaning and thus affecting the usage.