19
2.
Movement Controls
You can use the movement controls on this panel (while your printer is idle) to
move the X, Y and Z axis.
The extrude/ retract motor movement keys help in loading filament as well.
You can unlock the motors after a print job in order to move them around by
hand.
If you need to home any or all of your axis you can do it here. (4.20a)
(4.20a)
3.
Speed Control
If for some reason you need to adjust the speed at which your unit is printing,
use the “tuning adjustment” speed multiplier slider at the bottom of the screen.
Drag it left to slow and right to speed up printing. (*This will only work while
printing)
