18
To set up your preheat buttons click the
button next to either “Extruder
Temperature Override” or “Bed Temperature Override”. You will see a screen
like this appear (4.10b):
(4.10b)
Now enter in the desired preheat temp settings.
*An Extruder Preheat should not be set to be higher than 240 for ABS filament or 210 for PLA filament.
*A Bed Preheat should not be set to higher than 90 for ABS and 55 for PLA filament.
Once you have set up your preheat buttons, save them and they will show in
your Controls panel (4.10c)
(4.10c)
