ROBLIN Lido 2 Murale, Инструкция по использованию и установке

Страница: 11 / 36

9
4 OPERATION
GB
Control panel
Button Function Display
A
Turns the suction motor on and off at the
last speed used. Displays the speed set.
B
Decreases the working speed. Decreases the lighted segments.
C
Increases the working speed. Increases the lighted segments.
D
Activates intensive speed from any other
speed, including motor off. This speed is
timed to run for 10 minutes, after which
the system will return to the speed that
was previously set. Suitable for dealing
with severe cooking fumes.
I
flashes and the segments on the Display are
all lit.
It is disabled by pressing the Button.
E
Starts the motor at a speed that allows a
suction of 100 m
3
/h for 10 minutes every
hour, after which the motor stops.
Displays
24
and the segments on the Display,
initially all lit, turn off one at a time in cycle.
It is disabled by pressing the Button.
F
Activates automatic switch-off with a 30’
delay. Suitable to complete elimination of
residual odours. Can be activated from any
position, it is deactivated by pressing the
button of turning the motor off. Displays a flashing
Clock
symbol.
It is disabled by pressing the Button.
G
Performs a
Reset
of the Filter saturation
alarm when the button is pressed for ap-
proximately 2 seconds.
After 100 hours operation the
Drop
symbol is
displayed to indicate saturation of the Metal
Grease Filters.
After 200 hours operation the letter
C
is dis-
played to indi
c
ate saturation of the Activated
Charcoal Filters.
H
Turns the Lighting System on and off.
Keyboard Lock Command: it is possible to lock the keyboard, for example when cleaning the
Glass, when the Hood Motor and Lights are turned off.
Press
F
(Delay) for approximately 5 seconds to enable or disable Keyboard Locking, which is
always confirmed by a Beep and an animated signal on the display motor bar.
B A
D
C E
H
G
F