3
Pre-Installation
Ducting Options
The method of ducting should be carefully considered before installing the rangehood. The guide below recommends
the ducting components to use for all common ducting configurations ‐ through the top of the home (for the roof and
soffit) and through the rear of the home. 150mm round ducting should be used in conjunction with this model
rangehood. Alternatively, this rangehood can be operated in recirculation mode.
The highlighted area in the table below gives the recommended Uniduct item numbers for different mounting and
outlet options.
Duct mounting option
Rear
Top (Roof)
Top (Soffit/Eave)
Uniduct item numbers
150mm diameter
round outlet
1688
1634 and 1635
1634 and 1688
Extra lengths and/or bends may be required, depending on the length required and whether there is any structural
material in the run e.g. rafters.
Please note that this chart is designed as a guide. Please consult Robinhood customer services if unsure.
For NZ phone (09) 415 6000 or www.robinhood.co.nz. For AUS phone 1800 648 556 or www.robinhood.com.au.
