Installation Instructions
Option B: Connecting to a standpipe
The standpipe must be a minimum diameter of 38 mm (1 1/2 inch) and requires a trap for odor
control.
Use the hose support clip to secure the hoses, ensure they do not enter the standpipe more than
120 mm.
NOTE:
If there is surplus length of the drain hose it can be shortened. The Inlet Hose cannot be shortened.
Whilst the very first wash cycle is operating, observe all pipe and hose connections for leaks. Checking for
any trace of water on the floor in the cavity where the connections are after the first full cycle is a good
practice.
12
