Installation Instructions
3. Secure the brackets to the kick plate with screws and install the kick plate to the bottom of the
dishwasher.
Cold Water Connection
The Inlet Hose supplied requires a 3/4 inch BSP Male fitting, suitable for a flat sealing washer.
A faucet is important for isolating the supply to the dishwasher.
Ensure that the sealing washer supplied inside the hose connection is firmly in place. Check that the
initial water is clean, particularly if the supply has not been used for some time.
If you need to install the kick
plate inside, please cut the kick
plate to the appropriate height
according to the actual situation,
and ensure that the clearance
between the bottom surface of
the kick plate and the ground is
at least 10 mm.
10
