Installation Instructions
Connection of the Drain Hose
There are two recommended options for connecting the drain hose.
Option A: Connecting to the sink waste
This is the recommended method.
Check if your sink waste pipe has provision for this method.
Beware if it has the drain hose spigot that has never been used, it will likely be blanked off inside the
spigot.
This will need careful drilling/cutting out to make it operational. Ensure that the opening you make
has no ragged edges that will likely lead to debris snagging over time and causing a blockage.
First cut off the head of the drain hose. When inserting the hoses into the Y piece, wet the hose
ends for ease of insertion. Insert fully. Use the hose support clip provided, install as per the
illustration. Insure that the hoses have a straight run from the clip to the connection to the waste
pipe.
Cut off the head of the drain hose
11
