Robin America EY15-3, Руководство по обслуживанию

Страница: 39 / 62

- 36 -
Fig. 10-1
Fig. 10-2
10. RECOIL STARTER
10-1 RECOIL STARTER (STEEL)
Tools to be prepared: Driver, Pinchers (Pliers) and Protective Glasses
WARNING
Before starting the disassembly, make sure to wear the protective glasses.
10-1-1 DISASSEMBLY STEPS
(1) Relieve the spring power
-1: Hold the starter knob and extract the starter
rope.
-2: Extract the rope fully and hold the rope so
that the knot of the rope in the reel makes
a straight line with the rope guide.
-3: Hold the reel with the thumbs of both hands
firmly so that the rope will not be wound
back. (Fig.10-1)
-4: Pull out the knot of the rope out of the reel,
and unfasten the knot and pull it out toward
the starter knob. (2 people required)
-5: By controlling the reel with the thumbs of
both hands, unwind the reel gently until the
rotation of the reel stops.
WARNING
The spring power is at its maximum when the
rope is fully extracted. Do not put off your hand
nor loosen the pressure of your finger sud-
denly.
(2) Remove the component parts (Fig.10-2)
-1: Loosen the set-screw.
-2: Remove the set-screw, the latchet guide,
the friction spring and the latchet.
(3) Remove the reel (Fig.10-2)
-1: Hold the reel lightly so that it will not float.
Move the reel clockwise and counter-clock-
wise about a quarter circle for several times
until it moves smoothly.
Set Screw
Ratchet
Guide
Friction
Spring
Ratchet
Reel
Starter
case