Robin America EK13, Руководство по обслуживанию

Страница: 23 / 80

23
Step Parts to remove Remarks and procedures Fasteners
14
Ignition coil Remove the spark plug cap from the spark plug and
remove the ignition coil from the crankcase. 10 mm box spanner
M6 x 25 mm
：
2 pcs.
15
Starting pulley
Cooling Blower Remove the starting pulley and cooling Blower from the
flywheel. Fit a box wrench or a socket wrench on the
flywheel nut and loosen the nut by knocking the wrench
sharply with a hammer.
NOTE:
1. Do not insert a screwdriver or other object between
the flywheel blades which is a synthetic resin, otherwise
the risk of damaging the blades might be occurred.
2. Knock the wrench with a hammer in a counter
clockwise direction.
EK13
17 mm box spanner
or socket wrench
M12 nut
EK,17,20,28 and 30
19 mm box spanner
or socket wrench
M14 nut
16
Flywheel Remove the flywheel from the crankshaft. Leave the
nut temporarily to prevent the flywheel from dropping
out. Fit the flywheel puller as shown in Figure 5-11 and
remove the flywheel from the crankshaft by rotating the
bolt at the center in a clockwise direction.
(Knock the center bolt with a hammer sometimes)
Flywheel puller
M6 X 25L
With washer